Resource Library

This video discusses air infiltration through the building envelope and how to measure the rate of air infiltration using volumetric flow rate.

This video is part 2 of the lesson on insulation. This lesson will cover how the various insulation materials discussed in part 1 can be applied in buildings.

This video is part 1 of the discussion on insulation; viewers will learn about the various materials used for insulation in the building industry.

This episode is an introduction to windows and the arrangement of windows on a building, known as fenestration. This video covers important terms used to describe properties of windows and the energy impact of windows in a building.

In this video, guest speaker Dr. Marcus Bianchi, Senior Engineer at NREL, discusses R-values and how they can be used to indicate insulation performance.

In this video, viewers will receive a detailed explanation on how to read an electricity bill. Using 3 examples, learn about the various things you will see on an electricity bill and the differences between bills for residential and commercial buildings.

This webinar was originally presented by Amber Wood as part of the 2019 Design Challenge. In this webinar, Amber discusses REM/Rate, a home energy rating tool.

Using knowledge on heat pumps and HVAC systems from previous videos in this module, this episode dives deeper into the sample calculations for reducing the electrical load on a residential building.

This video explains the impact of design decisions, the importance of setting goals, and how measurable goals can lead to more successful building design.

This video explains the concepts of site energy and source energy. After introducing the conversion factors for source energy consumption, this video goes through 2 example calculations for zero energy balance.

This webinar, originally presented as part of the 2020 Solar Decathlon Webinar Series, discusses photovoltaic (PV) systems, the most common way for a building to generate renewable energy.

This video discusses weather data, including heating degree days and cooling degree days, and how this information is used to inform the ΔT term in the Fourier's Law equation.

In this episode, we discuss the cost of zero energy buildings and where the cost lands in relation to the average builiding in the U.S.

In this video, guest speaker Marc LaFrance, Windows Technologies Manager for the US Department of Energy, discusses advanced window technologies in buildings.

This video addresses ways to produce hot water and the energy impacts of using hot water in a building.

This video is presented by Dr. Nelson James, Researcher at the National Renewable Energy Lab, and Dr. Fredricka Brown from the US Department of Energy Building Technologies Office. Together, they discuss the motivations behind pursuing energy storage, how these technologies works, and the future of...

This first video in the HVAC module focuses on defining the efficiency of a heating system and ways to reduce the amount of energy purchased for a heating system.

This video discusses ways of bringing fresh air into buildings through ventilation and the energy consequences associated with doing so.

In this video, we will discuss the most common technologies for heating water, including storage, tankless, heat pump, and solar water heaters. We will also discuss best practices for saving energy with water heating systems.

This webinar, titled "What is Good Design?," was originally presented by the US Department of Energy's Sam Rashkin as part of the 2019 Design Challenge. In this webinar, Rashkin discusses how to consistently provide good designs for projects.